•
1 9
🔥 Popular Pick ⚡ Selling Fast

GripPad Magnetic Tool Mat – Tools & Bolts Stay Put, Even on the Hood

GripPad Magnetic Tool Mat – Tools & Bolts Stay Put, Even on the Hood

★★★★★ 4.8/5 Excellent 10,000+ Reviews

Stick it on the fender, drop the bolt, find it right where you left it. Flexible, double-sided, 3 sizes.

$36.00
$36.00 $72.00
50% OFF Sold out
Order today, arrives in 6-14 business days with tracking
30-Day Money-BackTry it risk-free
Hassle-Free ReturnsSimple, no hoops
  • No more lost 10mm bolts - parts stay where you drop them
  • Sticks to the fender, hood or tool chest - sideways and even upside down
  • Soft faux-leather face - no hard steel rim sitting on your paint
  • Flexible and only 7.5 mm thin - follows curved body panels
  • 3 sizes in the set - one for the car, the chest and the bench
How it works
Both sides of the mat are magnetic. Press it onto a clean steel surface and the back grips the panel while the top holds bolts, nuts, screws, sockets and hand wrenches. Lift it off by a corner when you are done.
Sizes and specs
Small 11.7 x 11.7 cm (4.6 x 4.6 in), 141 g. Long 32 x 10.4 cm (12.6 x 4.1 in), 365 g. Large 32 x 24.5 cm (12.6 x 9.6 in), 1.07 kg. 3-Piece Set: all three, 1.5 kg. Thickness 7.5 mm. Pebbled faux-leather face with a padded red edge.
Will it stick to my car?
Only to steel. Many newer hoods and fenders are aluminum, and the mat will not stick to aluminum, plastic or fiberglass. If a fridge magnet sticks, the mat will too.
Shipping
Ships within 1-3 business days, usually arrives in 5-11 business days in the US with tracking. Free US shipping on orders of $70+.
30-day money-back guarantee
Not happy? Return it within 30 days of delivery for a refund. No hoops.
Safety and care
Keep magnets away from phones, key fobs, bank cards and pacemakers. Wipe grit off the panel before you stick it on and lift it off instead of sliding it. Clean with a dry or slightly damp rag.
GripPad Magnetic Tool Mat – Tools & Bolts Stay Put, Even on the Hood
Size
Quantity
Estimated Delivery: 7–15 Business Days
Orders are typically processed within 1 business day.
View full details
Free US shipping on orders $70+ 30-day money-back guarantee Hassle-free returns Secure checkout Double-sided magnetic Real support, real peopleFree US shipping on orders $70+ 30-day money-back guarantee Hassle-free returns Secure checkout Double-sided magnetic Real support, real people
See it in action

Stick it on. Drop the bolt. Find it later.

Real garage footage, with the edge color edited to match the red mats we ship. The mats grab the steel hood and hold wrenches upside down, then peel off in a second.

Holds upside down

Wrenches stay put under the open hood.

Moves anywhere

Peel it off and stick it on any steel panel.

Grab and go

Every tool right at arm's reach.

Pointing into the engine bay where a part dropped
The 10mm problem

"Where did that bolt go?"

You set it on the fender for one second. It rolls, drops behind the engine, and a 20-minute job turns into an hour with a flashlight.

GripPad gives every bolt, nut and socket one spot that does not move - right on the car, at arm's reach.

  • No more parts rolling into the engine bay
  • No more walking back to the bench for each tool
  • No hard steel tray sitting on your paint
What makes it work

Simple design, built for the garage

GripPad 3-piece magnetic mat set 1 2 3 4
  1. 1
    Magnetic on both sidesThe back grips the steel panel, the top holds your parts.
  2. 2
    Soft pebbled faux-leather faceParts sit flat and quiet - no clanging steel.
  3. 3
    Padded red edgeSoft border, easy to spot in a dark engine bay.
  4. 4
    Flexible, 7.5 mm thinBends to follow curved fenders and panels.
Why DIY guys keep it in reach

One mat, a lot less hunting

Mat bent over a curved fender holding sockets

Follows the curve of the fender

A rigid tray rocks and slides on a rounded panel. The flexible mat bends with it and lies flat, so sockets stay where you set them.

7.5 mm thin, fully flexible
Mat stuck under an open hood holding wrenches

Works sideways and upside down

Stick it under the open hood, on the side of the tool chest or on the washer panel. Wrenches and sockets hang on instead of hitting the floor.

Double-sided magnetic
Lifting the mat off a car door, paint underneath clean

Kinder to your paint than a steel tray

The face and edge are soft faux leather, not bare steel. Wipe grit off the panel first and lift the mat instead of dragging it.

No hard metal rim
Small, long and large mats on a workbench

Three sizes for every job

Small for screws, Long for a row of sockets, Large for a ratchet and wrenches. Take the 3-Piece Set and keep one on the car, one on the chest, one on the bench.

4.6", 12.6" x 4.1", 12.6" x 9.6"
How to use

Ready in 3 seconds

Pressing the mat onto a steel fender
1

Press it on

Lay the mat on any clean steel surface - fender, hood, tool chest, mower deck.

Setting an extension on the mat under the hood
2

Drop parts as you go

Bolts, nuts, sockets and small wrenches stick where you put them.

Wiping the mat with a shop rag
3

Peel off, wipe clean

Lift it off by the corner and wipe oil and dust away with a dry rag.

Not just for the car

Anywhere there's steel, it's your third hand

Mat on a lawn mower deck

Mower tune-ups

Blade bolts stay on the deck, not in the grass.

Mat on a tool cart next to a motorcycle

Bike nights

Sockets lined up on the cart beside the bike.

Taking a wrench off the mat under the hood

Under the hood

Wrenches wait right above the engine.

Three mats on the underside of an open hood

One car, three mats

Each size gets its own job.

Mat on a fender next to the engine

Engine bay work

Sockets parked right next to the job.

Holding a wrench under the open hood

Right size, first try

See every wrench at a glance.

Without vs with

Same job. One spot for every part.

Drag the circle left and right to compare.

With the mat: parts held in one place WITH GRIPPAD Drop it, it stays put Soft padded edge
Without the mat: parts scattered WITHOUT Bolt dropped out of sight Sockets loose on the fender
Without
  • ✕Bolts roll off the curved fender
  • ✕Parts drop into the engine bay
  • ✕Back and forth to the bench
With GripPad
  • ✓Parts stay where you drop them
  • ✓Tools within arm's reach
  • ✓Soft face on the panel

Illustration of typical use with two photos of the same job. Holding power depends on the steel surface and the weight of the part.

What to expect

From the first oil change on

Day 1

Out of the box, onto the car

No setup. Stick it on the fender and drop the first bolt.

Week 1

It finds its spots

One on the car, one on the tool chest, one by the bench.

Week 4

You stop hunting for parts

Fewer trips to the bench, no flashlight searches in the engine bay.

Compare

GripPad vs an ordinary magnetic tray

GripPadOrdinary steel tray
Lies flat on curved panels✓✕
Sticks sideways and upside down✓✕
Soft face, no hard metal rim✓✕
Magnetic on both sides✓✕
Quiet - no clanging parts✓✕
3 sizes in one set✓✕

Good to know before you buy

Both sides magnetic
Flexible, 7.5 mm thin
Soft faux-leather face
30-day money-back
Sticks to steel only
Wipes clean with a rag
GripPad 3-piece set with gift box
Specs and what's in the box

The details

Small11.7 x 11.7 cm (4.6 x 4.6 in), 141 g (0.31 lb)
Long32 x 10.4 cm (12.6 x 4.1 in), 365 g (0.80 lb)
Large32 x 24.5 cm (12.6 x 9.6 in), 1.07 kg (2.36 lb)
3-Piece SetSmall + Long + Large, 1.5 kg (3.3 lb)
Thickness7.5 mm (0.3 in)
SurfacePebbled faux leather with padded red edge
MagneticBoth sides
Works onSteel (car body, tool chest, mower deck, appliances). Not aluminum, plastic or fiberglass.
CareWipe with a dry or slightly damp rag. Keep away from phones, key fobs and bank cards.
In the boxThe mat(s) you choose, in a gift box
30DAY
MONEY-BACK

Try it on your next job

Use it for 30 days. If it does not earn a spot in your garage, send it back for a refund. Simple, no hoops.

FAQ

Questions guys ask

Will it stick to my hood?
Only if the panel is steel. Many newer cars and trucks have aluminum hoods or fenders, and the mat will not stick to aluminum, plastic or fiberglass. Quick test: if a fridge magnet sticks to the panel, the mat will too.
Will it scratch my paint?
The mat has a soft faux-leather face and a padded fabric edge, with no hard metal rim. Any magnet can still trap grit, so wipe the panel and the back of the mat before you stick it on, and lift it off instead of sliding it.
How much weight will it hold?
It is made for bolts, nuts, screws, sockets, extensions and hand wrenches. It is not made for heavy parts like rotors or a heavy breaker bar hanging upside down. Holding power depends on the steel and the weight of the part, so we do not quote a pull-force number.
Which size should I get?
The Small fits a handful of screws, the Long fits a row of sockets, and the Large fits a ratchet plus wrenches. Most people take the 3-Piece Set so one can live on the car, one on the tool chest and one by the bench.
Is it safe near my phone or key fob?
Keep magnets away from phones, key fobs, bank cards and pacemakers. Do not leave the mat in a pocket next to them.
How do I clean it?
Wipe it with a dry shop rag, or a slightly damp one for oil. Metal shavings can be lifted off with tape. Let it dry before storing.
Does it work on a bike, motorcycle or boat?
On steel parts, yes. Many bike frames, motorcycle covers and boat parts are aluminum or plastic, so check with a fridge magnet first. It also works on steel tool carts, which is the easy fix.
How long does shipping take?
Orders ship within 1-3 business days and usually arrive in 5-11 business days in the US, with tracking. Free US shipping on orders of $70+.
What if I don't like it?
You have 30 days from delivery to return it for a refund.

What customers say